Gunstocks

HERITAGE MAUSER LR #1 BC W/O EJECTOR PORT Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

HERITAGE MAUSER LR #1 BC W/O EJECTOR PORT LEFT HAND STOCK RIGHT HAND ACTION Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLATINUM MAUSER LR #1 BC W/O EJECTOR PORT LEFT HAND STOCK RIGHT HAND ACTION Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLATINUM MAUSER LR #1 BC W/O EJECTOR PORT Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRO VARMINT MAUSER LR #1 BC W/O EJECTOR PORT Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

VARMINT THUMBHOLE MAUSER LR #1 BC W/O EJECTOR PORT Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRAIRIE HUNTER MAUSER LR #1 BC W/O EJECTOR PORT LEFT HAND STOCK RIGHT HAND ACTION Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRAIRIE HUNTER MAUSER LR #1 BC W/O EJECTOR PORT Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

FEATHERWEIGHT THUMBHOLE MAUSER LR #1 BC W/O EJECTOR PORT LEFT HAND STOCK RIGHT HAND ACTION Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CLA MAUSER LR #1 BC LEFT HAND STOCK RIGHT HAND ACTION W/O EJECTOR PORT Barrel Dimensions: Point A = 1 3/16" and Point B = 7/8" Center to Center of Action Screws: 7 7/8" Front Receiver Ring: 1 3/8" Overall Length of Floor Plate: 8 11/16" ATTENTION CUSTOMERS: Wood for the ejector port has not been removed. This stock is designed to accept the #1 Sporter Contour barrel. Due to the numerous variations of hardware used on these actions, we have not cut a bolt cut or safety cut in our stock and final fitting of floor plate may be required. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

HERT SAV 220 SLUG GUN DBM LA LH STH LH ACT FBC Shady Camo Satin Finish Satin Finish Pachmayr Pad Barrel Dimensions: Point A = 11/32" and Point B = 55/64" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS : This is for the older style floor plate that measures 5.7875. The gun is chambered for a 20 GAUGE shotgun shell. You will need the trigger guard, floor plate/mag plate, and all take down screws from the original stock. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect and will be subject to the 12% restocking fee . All Rapid Fire sales are final! Nonrefundable & nonreturnable.

AGILITY TIKKA M55 DBM SHORT ACTION BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

SPIKE CAMP TIKKA M55 DBM SHORT ACTION BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

AT-ONE THUMBHOLE TIKKA M55 DBM SHORT ACTION BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

AT-ONE TIKKA M55 DBM SHORT ACTION BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

HERITAGE TIKKA M55 DBM SHORT ACTION LEFT HAND STOCK RIGHT HAND ACTION BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLATINUM TIKKA M55 DBM SHORT ACTION LEFT HAND STOCK RIGHT HAND ACTION BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

HERITAGE TIKKA M55 DBM SHORT ACTION BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PLATINUM TIKKA M55 DBM SHORT ACTION BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PRAIRIE HUNTER TIKKA M55 DBM SHORT ACTION LEFT HAND STOCK RIGHT HAND ACITON BULL BARREL CHANNEL Barrel Dimensions - Point A : 1 1/16" Point B : 15/16" Center to Center Action Screws: 6 3/8" ATTENTION CUSTOMERS: You will need your factory Floor Plate, Action Screws, Trigger Guard, Trigger Guard Screw, Mag Box Release with Spring, Mag Box and Lug Insert. The Shims provided from factory stock are NOT required with the Boyds stock. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.