Gunstocks

CZ® 600 Alpha, Detachable Box Magazine, Long Action, Barrel Channel Dimensions: Point A (where barrel meets receiver) = 1 1/16" and Point B (9" forward from Point A) = 15/16" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTN Customers: torque setting for the takedown screws is 25-35 Inch lbs, over torquing could cause damage to the front magazine tab insert, and the stock. Boyds provides the trigger guard and front lug plate. You will use the factory takedown screws and factory front magazine tab. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CZ® 600 Alpha, Detachable Box Magazine, Long Action, Barrel Channel Dimensions: Point A (where barrel meets receiver) = 1 1/16" and Point B (9" forward from Point A) = 15/16" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTN Customers: torque setting for the takedown screws is 25-35 Inch lbs, over torquing could cause damage to the front magazine tab insert, and the stock. Boyds provides the trigger guard and front lug plate. You will use the factory takedown screws and factory front magazine tab. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CZ® 600 Alpha, Detachable Box Magazine, Long Action, Barrel Channel Dimensions: Point A (where barrel meets receiver) = 1 1/16" and Point B (9" forward from Point A) = 15/16" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTN Customers: torque setting for the takedown screws is 25-35 Inch lbs, over torquing could cause damage to the front magazine tab insert, and the stock. Boyds provides the trigger guard and front lug plate. You will use the factory takedown screws and factory front magazine tab. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CZ® 600 Alpha, Detachable Box Magazine, Long Action, Left Hand Stock, Right Hand Action, Barrel Channel Dimensions: Point A (where barrel meets receiver) = 1 1/16" and Point B (9" forward from Point A) = 15/16" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTN Customers: torque setting for the takedown screws is 25-35 Inch lbs, over torquing could cause damage to the front magazine tab insert, and the stock. Boyds provides the trigger guard and front lug plate. You will use the factory takedown screws and factory front magazine tab. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CZ® 600 Alpha, Detachable Box Magazine, Long Action, Barrel Channel Dimensions: Point A (where barrel meets receiver) = 1 1/16" and Point B (9" forward from Point A) = 15/16" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTN Customers: torque setting for the takedown screws is 25-35 Inch lbs, over torquing could cause damage to the front magazine tab insert, and the stock. Boyds provides the trigger guard and front lug plate. You will use the factory takedown screws and factory front magazine tab. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CZ® 600 Alpha, Detachable Box Magazine, Long Action, Left Hand Stock, Right Hand Action, Barrel Channel Dimensions: Point A (where barrel meets receiver) = 1 1/16" and Point B (9" forward from Point A) = 15/16" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTN Customers: torque setting for the takedown screws is 25-35 Inch lbs, over torquing could cause damage to the front magazine tab insert, and the stock. Boyds provides the trigger guard and front lug plate. You will use the factory takedown screws and factory front magazine tab. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

CZ® 600 Alpha, Detachable Box Magazine, Long Action, Barrel Channel Dimensions: Point A (where barrel meets receiver) = 1 1/16" and Point B (9" forward from Point A) = 15/16" Center to Center of Action Screws: 5 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTN Customers: torque setting for the takedown screws is 25-35 Inch lbs, over torquing could cause damage to the front magazine tab insert, and the stock. Boyds provides the trigger guard and front lug plate. You will use the factory takedown screws and factory front magazine tab. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.

PV CZ 550 DBM SA BBC Black Textured Paint Limbsaver Pad Laser Panel LOP 14" Barrel Dimensions: Point A = 1 7/64" and Point B = 55/64" Center to Center of Action Screws: 7 13/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety and Bolt Release are located on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonrefundable & Nonreturnable.

Hert Rem 700 SA Detachable Mag FBC Black Textured Paint Boyds Pad Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 6 1/2" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is inlet for the standard factory tapered barrel. These stocks are designed for the Remington 700 receiver with factory supplied detachable box magazine. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonrefundable and nonreturnable.

PV CZ 550 DBM SA BBC Nutmeg High Gloss Limbsaver Pad Laser Panel ATTENTION CUSTOMERS: VISIBLE SANDING MARKS THROUGHOUT STOCK, SCUFF ON RIGHT HAND SIDE OF BUTTSTOCK, LITTLE DENT RH SIDE OF FOREND, FINISH FLAW ON BOTTOM OF BUTT, NATURAL WOOD FLAWS BELOW BOLT CUT, AND OPPOSITE SIDE OF FOREND. Barrel Dimensions: Point A = 1 7/64" and Point B = 55/64" Center to Center of Action Screws: 7 13/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. Safety and Bolt Release are located on the side of the receiver. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonrefundable & nonreturnable.

SPIKE CAMP SAV AXIS LONG DBM FBC Black Jack Satin Finish Boyds Pad Barrel Dimensions: Point A = 1 11/32"; and Point B = 23/32" ATTENTION CUSTOMERS: For long action calibers; 25-06 REM, 30-06 SPFLD, or 270 WIN. When assembling, hold the barrel in the center of the channel and tighten screws. Length of Mag Box: 3 49/64" Center to Center of Action Screws: 4 25/32"; Over All Length of Part: 29 3/4" Comes with Boyds 1/2" Rubber Recoil Pad. Safety is located on the tang and the Bolt Release is on the side of the receiver. A black plastic trigger guard, screw, front mag tab, rear mag tab, and recoil lug are included with the stock. ;***Stainless Steel Metal trigger guards are also available: PN 100662. They can be found on the Accessories page.***ATTENTION CUSTOMERS: This stock is compatible with the Savage Axis II and Axis XP models. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.All finished parts have been CNC inlet to Boyds #39; House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonrefundable & nonreturnable.

SPIKE CAMP THUMBHOLE, SAVAGE® 93 BOLT ACTION, LEFT HAND ACTION, BULL BARREL CHANNEL SAVAGE MKII SHADY CAMO SATIN FINISH BOYDS PAD Barrel Dimensions: Point A = 13/16" and Point B = 13/16" Center to Center of Action Screws: 3 11/16" Over All Length of Part: 31" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Sav93-E/MKII heavy barrel with inlet trigger guard and floor plate. Action measures 7 3/4" long on the 93E/MKII action. Pre-93E receivers (with a lug at the back of the reciever) can be fit to our 93E/MKII stocks but will require fitting of your receiver and barrel to the stock. Minor gap will be visible on rear of stock with older pre-accutrigger actions. Older receivers are about 4 inches longer and will need to be fit. Variations in action mounting screw pillars exist between models. Do not over tighten. All plastic stocks, and some laminate and hardwood stocks will require you to purchase a different trigger guard and floor plate. All plastic stocks, and some laminate and hardwood stocks will require you to purchase a different trigger guard and floor plate. You can purchase them on the Accessories page, bottom left-hand corner. Part numbers for 22 LR: 100654 (Blued), 100655 (Nickel). Part numbers for 17hmr/22mag: 100656 (Blued), 100657 (Nickel). Some stocks may also require different action screws which are available through DiProductsInc: PN 13020. Variations in action mounting screw pillars exist between models. Do not over tighten. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

SPIKE CAMP SAV 110 BBR DETACHABLE MAG LONG ACTION LH ACT FBC SKY SATIN FINISH BOYDS PAD PILLAR BEDDING Barrel Dimensions: Point A = 1 5/16" and Point B = 3/4" Center to Center of Action Screws: 5 1/16" Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. ATTENTION CUSTOMERS: This stock is designed for the Savage detachable box magazine rifle with bottom bolt release. The magazine release is located on the bottom of the floorplate. Not designed for old style side magazine release. The magazine inletting is designed for the removable frame from the factory stock.ATTENTION CUSTOMERS: Attention Customer: If you have an Apex Hunter model it will not be a direct fit in this stock, as it will require modifying the trigger area for clearance due to differences in the trigger mechanism. ATTENTION CUSTOMERS: If you have a XP model with a synthetic stock, you will need to purchase the SAVAGE LA PLASTIC MAG WELL from our Accessories page, Part No. A09160 or SAVAGE LA METAL MAG WELL, Part No. A09213. Due to the many variations of trigger guards that have bed used for Savage Actions. Boyds uses a flat bottom metal design. Fitting for plastic and some metal models may be needed or contact Savage or Brownells for the flat bottom design. These stocks are designed for the 3 piece design DETACHABLE BOX MAG parts as found on wood stocks. Some plastic stocked models will require you to purchase additional parts from the Accessories page, SAVAGE LA PLASTIC MAG WELL, part no. A09160. Not designed for old style side magazine release. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final!

CLA SAKO 75-1 HUNTER SA FBC CLARO X WALNUT SATIN FINISH BOYDS PAD Barrel Dimensions: Point A = 1.042" and Point B = .707"Center to Center of Action Screws: 6.683" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need floor plate, take down screws, and mag box from the factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonrefundable & nonreturnable.

AMERICAN PLAINSMAN REMINGTON 870 12GA STOCK Nutmeg ATTENTION CUSTOMERS: 10 1/2" factory stock bolt is required for this buttstock. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 5/8"Stock Height at Receiver: 1 15/16"Stock Width at Receiver: 1 1/2"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt - 10 1/2Comes with Pachmay Decelerator recoil padAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTENTION CUSTOMERS: These stocks are designed for the larger frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

AMERICAN PLAINSMAN REMINGTON 870 12GA STOCK Pepper ATTENTION CUSTOMERS: 10 1/2" factory stock bolt is required for this buttstock. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 5/8"Stock Height at Receiver: 1 15/16"Stock Width at Receiver: 1 1/2"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt - 10 1/2"Comes with Pachmay Decelerator recoil padAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTENTION CUSTOMERS: These stocks are designed for the larger frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

AMERICAN PLAINSMAN REMINGTON 870 12GA STOCK Walnut It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS: You will need to purchase the 8 5/16" mounting bolt for wood stocks from the Accessories page, Part Number: A09168.Top Tang Width: N/ATop Tang Length: N/ABottom Tang Width: 1/2"Bottom Tang Length: 5/8"Stock Height at Receiver: 1 15/16"Stock Width at Receiver: 1 1/2"Overall Length of Stock: 13 3/4"Measurement of Receiver Mounting Bolt - 8 5/16"Comes with Pachmay Decelerator recoil padAll finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect.ATTENTION CUSTOMERS: These stocks are designed for the larger frame models. All Rapid Fire sales are final! Nonreturnable & nonrefundable.

PH CZ 550 AMERICAN LONG ACTION FBC PEPPER SATIN FINISH BOYDS PAD ATTENTION CUSTOMERS: FINISH FLAWS AND DENTS ON COMB It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.   Barrel Dimensions: Point A = 1 7/64" and Point B = 47/64" Center to Center of Action Screws: 7 53/64” Over All Length of Part: 31 1/2" Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS:  You will need your takedown screws, floor plate assembly, and mag well. All finished stocks have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonrefundable & nonreturnable.

FT WIN 70 PRE-64 LA 2PC FP FBC Black Jack Satin Finish Limbsaver Pad Laser Symbol: Wolf Barrel Dimensions: Point A = 1 1/4" and Point B = 3/4" Center to Center of Action Screws: 7 7/16" Over All Length of Part: N/A Comes with Boyds' 1/2" Rubber Recoil Pad. ATTENTION CUSTOMERS: These stocks are designed for the Winchester model 70 pre 64 long action, with a 2 piece floor plate, factory barrel. You will need your factory Trigger Guard, 2-Piece Hinged Floor Plate, 3 Action Screws, Machine Screw w/escutcheon(Forend Location) & Magazine Box. It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part. All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm. Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonrefundable & nonreturnable.

PLAT REM 700 LA 1PC FP LH STOCK RH ACT BBC Walnut Satin Finish Pachmayr Pad Laser Panel Pillar Bedding Barrel Dimensions: Point A = 1.245" and Point B = 0.9"Center to Center of Action Screws: 7.345" Over All Length of Part: 31.5"Comes with Boyds' 1/2" Rubber Recoil Pad.It is your responsibility to confirm the dimensions of your firearm with the supplied dimensions of our part.ATTENTION CUSTOMERS:You will need the floor plate, mag box, and take down screws from your factory stock.All finished parts have been CNC inlet to Boyds' House Action. Variations may exist from firearm to firearm, minor fitting may be required to get that perfect fit to your firearm.Natural cosmetic imperfections such as minor knots, burls, heartwood, mineral lines or minor cosmetic fill work are not considered a defect. All Rapid Fire sales are final! Nonrefundable & nonreturnable.