Accessories

A one-time use code delivered by email. Gift Certificates will be delivered the following business day. Our system automatically charges freight and tax, but when we charge the card those charges will be removed.

A one-time use code delivered by email. Gift Certificates will be delivered the following business day. Our system automatically charges freight and tax, but when we charge the card those charges will be removed.

A one-time use code delivered by email. Gift Certificates will be delivered the following business day. Our system automatically charges freight and tax, but when we charge the card those charges will be removed.

A one-time use code delivered by email. Gift Certificates will be delivered the following business day. Our system automatically charges freight and tax, but when we charge the card those charges will be removed.

Compatible with the At-One and At-One Thumbole gunstocks only. Constructed of heavy duty polymer, 9 slot rail allows for the attachment of various Picatinny rail-mounted accessories such as lights, vertical grips, etc. •UPC # 873750005102

This metal set includes 1-Trigger Guard, 1-Floor Plate, and 2-Mounting Screws. Due to the many variations of 93 and MKII guns produced, certain actions may require longer action screws for proper mounting. These screws can be purchased through SAVAGE or purchased through your local hardware store or machine shop.

A black anodized, aluminum bottom metal and trigger guard with a polished steel to allow for a tight grasp on the magazine release button. Instructions and all necessary parts will be provided. The bottom metal kit allows Ruger American rifles to use of the Ruger Mini 30 magazines for the 7.62x39 caliber when they are assembled to a Boyds stock. ATTENTION CUSTOMERS: Critical to start both screws before tightening to final torque (30 in LBS). Learn more about this kit here: Ruger American 7.62x39 Mini 30 Magazine Kit

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles.

This magazine well fits magazines where the latch is part of the magazine. If your Long Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

This magazine well fits magazines where the latch is part of the magazine. If your Short Action Savage rifle has a plastic stock with the magazine well molded into the stock and not transferable to another stock, you will need this piece to make our stock with a Detachable Magazines fit your rifle. This part is not required for the Savage Axis or Edge rifles. Machined black anodized aluminum material.

A black anodized, aluminum bottom metal and trigger guard with a polished steel to allow for a tight grasp on the magazine release button. Instructions and all necessary parts will be provided. The bottom metal kit allows other Ruger American rifles to be converted to allow the use of the Ruger AI-Style magazines with compatible calibers when they are assembled to a Boyds stock. Not compatible with 7.62x39 calibers. See compatible calibers here: Ruger American Magazine Styles

Intended use for attachment with mono pod shooting stabilizer on the Boyds At-One Gunstock for the rear bottom of buttstock. One-to-one modular component will exchange with a standard bottom cap. Dimensionally the same as the standard bottom cap with a 3-slot section Picatinny rail built in. CNC machined aluminum with black anodization. Remove standard bottom cap and install new bottom cap with Picatinny rail section. Attention customers: this part in not intended for use on the forend section of the stock!

This butt pad is easily installed onto the At-One™, Agility™, Spike Camp™, and Quest gunstocks using a 1/8" Allen Wrench. If you are installing this 1" butt pad on a Spike Camp™ gunstock, you will need to use the screws from your Boyds gunstock's 1/2" pad, not the supplied screws with this 1" butt pad accessory. They will be too short.

This 1/2" Kick-eez brand recoil pad fits At-One™ series, Agility™, Spike Camp™, and Quest gunstocks.

Beaver-style; flat design forend. Width 2" at rear to 1-13/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

Sleek and slender standard forend. Width 1-3/4" at rear to 1-7/16" at front. Over molded components are a plastic substrate with over molded panels of rubber.

Gun Metal Grey Extended buttplate for At-One series and Agility stocks. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

Extended buttplate for At-Ones. 14.5" to 15.25" Length of Pull assembly. 1/2" thick over molded (rubber) recoil pad.

Gun Metal Grey Buttplate for At-One series and Agility stocks. Approximately 12-1/2" to 14" Length of Pull. 1/2" thick over molded (rubber) recoil pad.

This extended LOP butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

This butt plate assembly will increase the LOP from the standard butt plate assembly minimum and maximum by approximately 3/8" but still provide full range of adjustability. It will provide vertical adjustability in both directions (up or down) of approximately 1-11/16" (one and eleven sixteenths inches) Removal of the butt pad is required for adjustment. Loosen the two clamping screws, adjust to desired vertical placement, tighten clamping screws and reinstall butt pad.

ROTATING AT-ONE & AGILITY BUTT ASSEMBLY Attaches to the existing butt plate of the At-One and Agility adjustable butt plate assembly. It will provide rotation on the recoil pad to allow the user to position the pad to fit their shooting style. To install: Remove the butt pad from the adjustable butt plate assembly, attach using the mounting screws and reattach the butt pad. Increases LOP by approximately 3/4" when installed. Will work in conjunction with the vertically adjustable assembly. Technical Specification: 5.7 degrees per rotation index, 40 degrees per side (right and left) with 80 degrees of full index range. Engraved index identifier marks. Aluminum housing, stainless dowel pins, black phosphate steel snap ring. Black anodized coating. The threaded knob is hard anodized and Teflon impregnated to prevent gulling of the threads. Operates without tools.

Thicker, more vertical grip designed for prone shooting. Over molded components are a plastic substrate with over molded panels of rubber. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Thicker, more vertical grip designed for prone shooting. Plastic substrate – Super Tough, Impact Modified, Heat Stabilized Nylon. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Swept back pistol grip design. Over molded components are a plastic substrate with over molded panels of rubber. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

This Quick Detach Sling Swivel features a 1.25" Loop for compatibility with a wide variety of sling types and is quickly and easily installed or removed from our At-One QD Sling Socket via its large push button. The QDS swivel is constructed of Stainless Steel for strength and durability, blued finish and is a 100% US Made product.

Blue Skulls Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Blue Skulls Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Zombie Hunter Skulls Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Zombie Hunter Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Zombie Hunter Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap.

Red Skulls Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Red Skulls Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Red Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Pink Camo Dipped component set for Boyds At-One Stock. Includes Beaver-style; flat design overmolded forend - Width 2" at rear to 1-13/16" at front; Thicker, more vertical plastic grip designed for prone shooting; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

Pink Camo Dipped component set for Boyds At-One Stock. Includes Sleek and slender standard plastic forend - Width 1-3/4" at rear to 1-7/16" at front; Traditional swept back plastic pistol grips; Overmolded adjustable comb and plastic bottom cap. ATTENTION CUSTOMERS: HAND GRIP SETS ARE NOT COMPATIBLE WITH AT-ONE THUMBHOLE STOCKS.

This kit is compatible with short action caliber Mossberg Patriot models with AICS platforms and can be used to convert a rotary detachable magazine to an AI Magazine. Not compatible with 350 Legend and 450 Bushmaster calibers due to cartridge design. This kit is not compatible with factory stocks, must have a Boyds Hardwood Gunstock in order to convert to the AI Magazine.

Machined black anodized Tikka T3 Aluminum Bottom Metal with trigger guard latch & spring with roll pin. Compatible with Tikka T3, T3x, & T3 Lite Boyds Gunstocks. You will use your factory takedown screws to install.

Machined black anodized Tikka T3 Lite Aluminum Bottom Metal with trigger guard latch & spring with roll pin. Compatible with Tikka T3 & T3 Lite Boyds Gunstocks. You will use your factory takedown screws to install.

The Rail Sling Attachment provides a forward sling attachment point for the Magpul MS3 and other clip-in sling systems. •Solid Steel construction •Milspec manganese phosphate finish •Compatible with 1913 Picatinny rails •UPC # 873750005249

Flex Fit Black: This patented Flexfit(TM) mid-profile, structured cap sports a six-panel, 3 1/2" crown, Permacurv visor with silver under-visor, and sewn eyelets. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Sweat-resistant 84% nylon/14% cotton/2% spandex, and 98/2 cotton twill/spandex. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Black: This patented Flexfit(TM) mid-profile, structured cap sports a six-panel, 3 1/2" crown, Permacurv visor with silver under-visor, and sewn eyelets. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Sweat-resistant 84% nylon/14% cotton/2% spandex, and 98/2 cotton twill/spandex. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Black: This patented Flexfit(TM) mid-profile, structured cap sports a six-panel, 3 1/2" crown, Permacurv visor with silver under-visor, and sewn eyelets. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Sweat-resistant 84% nylon/14% cotton/2% spandex, and 98/2 cotton twill/spandex. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Red Stripe: This patented Flexfit(TM) Sport-Tek Flex-Fit Colorblock Performance Cap wicks sweat like a champ! 84% nylon/14% cotton/2% spandex. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Red Stripe: This patented Flexfit(TM) Sport-Tek Flex-Fit Colorblock Performance Cap wicks sweat like a champ! 84% nylon/14% cotton/2% spandex. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Red Stripe: This patented Flexfit(TM) Sport-Tek Flex-Fit Colorblock Performance Cap wicks sweat like a champ! 84% nylon/14% cotton/2% spandex. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Flex Fit Red Stripe: This patented Flexfit(TM) Sport-Tek Flex-Fit Colorblock Performance Cap wicks sweat like a champ! 84% nylon/14% cotton/2% spandex. Boyds are designed with flat embroidered front, American flag embroidered on the left side, and official Boyds logo on the back. Cap Measurements: S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Our Rights" T-shirt Design in Black with white 1776 graphic and "Shall Not Be Infringed" quote on front. Boyds red logo on front. Boyds red B and #BetterwBoyds on the back. White Boyds logo and South Dakota, USA on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Our Rights" T-shirt Design in Black with white 1776 graphic and "Shall Not Be Infringed" quote on front. Boyds red logo on front. Boyds red B and #BetterwBoyds on the back. White Boyds logo and South Dakota, USA on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Our Rights" T-shirt Design in Black with white 1776 graphic and "Shall Not Be Infringed" quote on front. Boyds red logo on front. Boyds red B and #BetterwBoyds on the back. White Boyds logo and South Dakota, USA on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Our Rights" T-shirt Design in Black with white 1776 graphic and "Shall Not Be Infringed" quote on front. Boyds red logo on front. Boyds red B and #BetterwBoyds on the back. White Boyds logo and South Dakota, USA on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "For Those Who Love The Woods" T-shirt Design in Olive Green with white tree graphics and Boyds red logo on front. Boyds red B and #BetterwBoyds on the back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "For Those Who Love The Woods" T-shirt Design in Olive Green with white tree graphics and Boyds red logo on front. Boyds red B and #BetterwBoyds on the back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "For Those Who Love The Woods" T-shirt Design in Olive Green with white tree graphics and Boyds red logo on front. Boyds red B and #BetterwBoyds on the back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "For Those Who Love The Woods" T-shirt Design in Olive Green with white tree graphics and Boyds red logo on front. Boyds red B and #BetterwBoyds on the back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "American Classic" T-Shirt design in Steel Blue with American Flag Gunstock Graphic and "Preserving the Tradition" quote in white lettering. Red Boyds logo on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "American Classic" T-Shirt design in Steel Blue with American Flag Gunstock Graphic and "Preserving the Tradition" quote in white lettering. Red Boyds logo on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "American Classic" T-Shirt design in Steel Blue with American Flag Gunstock Graphic and "Preserving the Tradition" quote in white lettering. Red Boyds logo on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "American Classic" T-Shirt design in Steel Blue with American Flag Gunstock Graphic and "Preserving the Tradition" quote in white lettering. Red Boyds logo on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "At-One" T-shirt Design in Chocolate with Boyds Red Logo on front and White American Flag graphic on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "At-One" T-shirt Design in Chocolate with Boyds Red Logo on front and White American Flag graphic on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "At-One" T-shirt Design in Chocolate with Boyds Red Logo on front and White American Flag graphic on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "At-One" T-shirt Design in Chocolate with Boyds Red Logo on front and White American Flag graphic on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Spike Camp" T-shirt Design in Steel Blue with white Boyds logo, Spike Camp gunstock, and Spike Camp logo on front. Grayscale American Flag graphic with @BoydsGunstocks on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Spike Camp" T-shirt Design in Steel Blue with white Boyds logo, Spike Camp gunstock, and Spike Camp logo on front. Grayscale American Flag graphic with @BoydsGunstocks on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Spike Camp" T-shirt Design in Steel Blue with white Boyds logo, Spike Camp gunstock, and Spike Camp logo on front. Grayscale American Flag graphic with @BoydsGunstocks on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds "Spike Camp" T-shirt Design in Steel Blue with white Boyds logo, Spike Camp gunstock, and Spike Camp logo on front. Grayscale American Flag graphic with @BoydsGunstocks on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds Vertical Logo T-Shirt design in Sand with Grayscale American Flag graphic on the right sleeve and Boyds Red B on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds Vertical Logo T-Shirt design in Sand with Grayscale American Flag graphic on the right sleeve and Boyds Red B on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds Vertical Logo T-Shirt design in Sand with Grayscale American Flag graphic on the right sleeve and Boyds Red B on back.

Port & Company® Essential Tee. Nothing beats this traditional t-shirt in comfort and casual style. 6.1-ounce, 100% soft spun cotton with a rib knit collar and shoulder to shoulder back neck tape. Boyds Vertical Logo T-Shirt design in Sand with Grayscale American Flag graphic on the right sleeve and Boyds Red B on back.

Remington 870 stock bolt measures ¼" x 28 TPI 8" OAL. required for most synthetic to wood stock replacements. Compatible with Field Design and American Plainsman Remington 870 Buttstocks only. Not compatible with Sterling Thumbhole design.

Boyds Leather Look Recoil Pad - 1/2". Delivers much needed recoil reduction and is available in the popular classic shape. ***These pads require final sanding/fitting to your Boyds' stock. These are not pre-fit pads.***

This 1" Limbsaver Pad provides up to a 70% felt recoil reduction for a comfortable, flinch-free shooting experience. This is a grind-to-fit recoil pad.

This is the ideal pad to tame heavy kicking firearms. The D752B Decelerator 1" pad delivers dramatic recoil reduction and is available in the popular classic shape. •Dimensions are 5.3" x 1.68" ***These pads require final sanding/fitting to your Boyds' stock. These are not pre-fit pads.***

Metal Ruger American Trigger Guard with Mag Catch for Long Actions. Specifically designed to replace plastic trigger guard originally furnished on Boyds laminate stocks.

Metal Ruger American Trigger Guard with Mag Catch for short actions. Specifically designed to replace plastic trigger guard originally furnished on Boyds laminate stocks.