If experience trouble creating or logging into your account, please call Customer Service at 1-605-996-5011.

GUNSTOCKS DESIGN GALLERY

Factory fit and finished stocks have been machined to fit and then finished with one of Boyds superior finishes. We machine each stock using house actions, which refers to the steel upon which we base the measurements. From this action, we machine a 0.020” to 0.040” clearance fit between wood and metal including barrel channels, unless otherwise noted. This allows for variations within firearm manufacturing ranges as well as for minor fluctuations due to wood moisture content during the manufacturing processes. For those who desire an exact fit between wood and metal, this designed clearance provides the space needed for bedding. When machining barrel channels, unless otherwise stated, we use the manufacturer's standard sporter barrel. Note: When machining Mauser actions, we typically use #1 contour barrel.

Factory fit and unfinished

Factory fit and unfinished stocks are also fit to our house actions but are sanded, not finished. Exteriors are completely shaped and broad faces are rough sanded to an 80 or 100 grit scratch pattern. Minor machining marks might be present and final finish sanding and finishing are required.

Slight fitting may be required

Factory fit stocks, whether finished or unfinished, typically can be bolted to your firearm with no fitting needed. However, please understand that there are occasionally slight variations in individual guns which will require minor fitting adjustments that a novice should be able to perform. If you need assistance, please consult a competent and qualified gunsmith*.

Apple Jack

Black Jack

Blaze

Coyote

Forest Camo

Maroon/Pepper

Nutmeg

Pepper

Royal

Royal Jacaranda

Shady Camo

Sky

Zombie

Hornet

AR-15

The AR-15 stock set brings a new flare to the AR platform. Extending the lines of the rifle into the stock creates an aesthetically appealing firearm. The buttstock is a modern twist on the traditional A2 style. The hand guards are machined to a contour that compliments a shooters hand as well as shooting bags. A choice of a finger grooved or smooth grip allows for individual shooters to choose a design that will help them gain maximum control of the rifle.

Buttstock weighs approximately .9 LBS.

Handguard weighs approximately .3 LBS.

Grip weighs approximately .15 LBS.

Agility

A Modern Version of a Traditional Gunstock. The Agility™ is the perfect combination of modern and traditional stock designs merged to give you the performance features you need with the traditional traits you love, resulting in a more accurate rifle. The traits you recognize with features you need to enhance your shooting performance.

Agility Features:

Ergonomically designed Hybrid Grip, comfortable for offhand and prone shooting
Ambidextrous Monte Carlo comb and cheekpiece to allow for proper cheek weld
Semi-Beavertail forend to fit easily in the hand. Approximately 2-3/16” at rear, 1-5/8” at front
Overall ambidextrous design to accommodate all shooters
1/2" Boyds Leather-look recoil pad for quick non-slip mounting
All Finished Boyds' Agility stocks come with 1 front and 1 back blued swivel stud.
Average physical weight of 3 lbs. that allows for great balance
Laboratory acid based satin finish - proven to resist chemical damage and harsh treatment from the elements
The length of pull range is 12.5-14" standard, 14.5-15.25" extended
The overall length is 28.5” collapsed, 30” extended

American Plainsman

Boyds A.P. Buttstocks and Forends are designed not only to look great, but to aid both the left and right handed shooter in the field. Compare the A.P. to the utilitarian design offered on most factory 2-piece shotguns and rifles and you will see what you're missing with your standard stock. A higher parallel comb design reduces cheek slap under recoil and helps with enhanced bead acquisition at the trap range or out in the field. A lower toe design with shooter friendly pitch and the addition of the Pachmayr Decelerator recoil pad gives the shooter superior shoulder to stock contact to help reduce muzzle jump and tame the recoil of the heaviest Turkey and Slug loads out there. A shorter pronounced grip with shortened flutes helps keep thumb knuckle forward of nose and aids the shooter for swift snap shooting and quick shoulder mounting. The forend is fluted and contoured for improved finger, thumb, and palm contact to forend to aid shooter for quicker action response.

Buttstocks

Weight is approximately 1.9 Lbs.
Length of pull is 14 1/4"
Pachmayr Decelerator Recoil Pad
Factory Fit and finished reference stocks that have been 100% fit and sanded to our house action, then finished
Factory Fit stocks can be pulled from the box and bolted to your firearm with no fitting; however, on occasion, slight variations of individual guns may occur, requiring minor fitting that a novice should be able to perform

Forends

Factory Fit and finished reference stocks that have been 100% fit and sanded to our house action, then finished
Factory Fit stocks can be pulled from the box and bolted to your firearm with no fitting; however, on occasion, slight variations of individual guns may occur, requiring minor fitting that a novice should be able to perform

At-One

The revolutionary At-One™ Adjustable Gunstock from Boyds lets you precisely adjust your gun for an overall, true custom fit, and further fine-tune your gun, depending on varying situations. Adjust your gun to perfectly fit other users in seconds.

At-One Features:

Bring-It comb adjustments at the push of a button with 9/16” adjustable range
Bring-It butt pad adjustments allowing 12 ½” – 14” length of pull
Interchangeable grip, comb, and forend available as accessories, Target or Traditional )Traditional swept back pistol grip design included)
Reinforcing screws installed for added strength
Internal material of the forend has been removed to reduce weight
1/2" leather-look rubber recoil pad comes standard for non-slip shouldering
Laboratory acid based satin finish proven to resist chemical and harsh weather conditions
Comes with swivel studs installed
Single-point sling mount included
The weight is approximately 3 lbs
Overall length is approximately 30 1/4” butt retracted, overall length of butt extended is approximately 31 3/4”

Classic Fully Inlet

Sleek beveled hand-conforming forend that is flat/oval in shape allowing superior palm to forend weld to help improve off hand shooting
Classic design pistol grip for quick shoulder mount
Graceful cheek piece runs parallel to the bore driving recoil to the shoulder, reducing cheek slap and discouraging the shooter from climbing up onto the scope
Reinforcing screws installed for added strength
Internal material of the forend has been removed to reduce weight
1/2" leather-look rubber recoil pad comes standard for non-slip shouldering
Laboratory acid based satin finish proven to resist chemical and harsh weather conditions
Finished and Unfinished parts come with swivel studs installed
The length of pull on this stock is 13 3/4"
The weight is approximately 2.8 lbs.

Classic Uninlet

1/2" leather-look rubber recoil pad comes standard for non-slip shouldering

The length of pull on this stock is 13 3/4"

The weight is approximately 5lbs.

Uninlet stocks are shaped only

Field Design

The Boyds Field Designed buttstocks and forends provide an economical means of breathing new life into proud, old guns. To uphold the nostalgia of these firearms, Boyds has recreated stocks inspired by the traditional appearance of these older firearms. The Field Design buttstocks and forearms are finished to replicate the appearance of the traditional oil rubbed finish.

NOTES:

There may not be a forend for every buttstock offered
Wood grain may vary from stock to forend

Featherweight Thumbhole

The FT's design is a synthesis of design elements requested by you, the customer, for a thumbhole design. With a large rollover cheek piece for scope usage and straight comb design to minimize cheek slap when shooting, the hand conforming thumbhole allows for increased accuracy while distributing the recoil among the palm and shoulder thus minimizing muzzle jump and felt recoil. The forend is proportioned to nicely complement barrels from 21 inches to 25 inches in length and will accommodate barreled actions with standard sporter contour barrels. Larger barrels up to a tapered varmint design can be inlet in these stocks. The forend also has side vents which permit the free floating barrel to cool efficiently for those long days at the range. The FT's are available in a wide range of inlettings to accommodate most barreled actions. It must be noted that due to the variations among models and tolerances that factories may or may not routinely adhere to, some minor fitting may be required, even on our fully finished drop in parts, to achieve that perfect fit to your action.

Featherweight Thumbhole Fully Inlet

Internal material of the forend and butt have been removed to reduce weight
1/2" Leather-look rubber recoil pad for non-slip shouldering
Reinforcing screws installed for added strength
Tight tolerance of wood to metal fit to ensure accuracy
Finished and Unfinished parts come with Swivel Studs Installed - 2 front, 1 rear
Overall length is approximately 32"
The weight is approximately 2.3 - 2.5 Lbs.
Stocks are inlet for standard factory sporter contours. The barrel channel on these stocks can be opened up to Magnum factory contours as well as Factory Varmint Contours by you or a gunsmith, BUT the forends are not wide enough for bull barrel contours (straight contours of .875 or larger).

Featherweight Thumbhole Uninlet

1/2" Leather-look rubber recoil pad for non-slip shouldering
Overall length is approximately 32"
The length of pull on this item is 13 3/4"
The weight is approximately 5lbs.
Uninlet stocks are shaped only

Heritage

The Heritage follows the design of the Prairie Hunter. This design sports a Monte Carlo comb that is slightly raised to parallel the bore to aid with proper cheek alignment for scope usage. Nicely blended flutes in front of the comb conceal the thumb and prevent thumb to nose contact when the gun recoils. A graceful cheek piece provides additional facial support and is blended beautifully into the stock and grip which discourages the shooter from climbing up onto the scope and keeping the stock aligned with the shoulder for superior recoil absorption. A slender and slightly open oval pistol grip with slight palm swell is well defined with the comb to give you a firm grip, allowing quick mounting to the shoulder and aiding with proper eye position with the scope. The forend is where the Heritage deviates from the Prairie Hunter. The forend is round in cross-section to allow for the addition of a checkering pattern that wraps around the forend and aids in the grip of the shooters forward hand.

Heritage Features:

Material under barrel channel has been removed to improve balance of the firearm
1/2" rubber recoil pad for quick non-slip mounting
All Finished stocks come with 1 front and 1 rear blued swivel stud
All Finished stocks are 100% machine inlet for a drop in fit
Reinforcing screws installed for added strength at no additional cost
Average weight of 2.8 lbs.
Laboratory acid-based satin finish, proven to resist chemical damage and harsh treatment from the elements
The length of pull on this stock is 13 3/4"
The overall length is approximately 32"

Military

Sticklers for historical accuracy will appreciate our military replacement stocks in American Walnut; it's not only authentic down to the last detail, we apply a lustrous walnut stain and a natural oil finish to bring out the color and grain like you'll see in no other military stock.

Mini Pro Varmint

The first youth size gunstock offered by Boyds. Available for the Savage Rascal model only.

Mini Pro Varmint Features:

Comes plastic buttplate.
11 1/4" Length of pull
1 - front and 1- rear swivel stud provided for rapid assembly and disassembly of bipod mount.
Overall length 22 1/2"
Approximate weight is 1.5 lbs.

Platinum

The Platinum follows the design of our Classic. The slender, somewhat open grip is well defined, but does not extend too far below the toe line. The comb is parallel to the bore, which aids in scope use, and because of its straight-line design, minimizes cheek slap under recoil. Additional facial support is provided by a graceful cheek piece that blends perfectly with the overall shape of the buttstock. The forend is where the Platinum deviates from the Classic. The forend is round in cross-section to allow for the addition of a checkering pattern that wraps around the forend and aids in the grip of the shooters forward hand.

Platinum Features:

Classic design pistol grip for quick shoulder mount
Graceful cheek piece runs parallel to the bore driving recoil to the shoulder, reducing cheek slap and discouraging the shooter from climbing up onto the scope
Reinforcing screws installed for added strength
Internal material of the forend has been removed to reduce weight
1/2" leather-look rubber recoil pad comes standard for non-slip shouldering
Laboratory acid based satin finish proven to resist chemical and harsh weather conditions
Finished parts come with swivel studs installed
Standard length of pull is 13 3/4"
Approximate weight of 2.8 lbs

Prairie Hunter

The Prairie Hunter design sports a Monte Carlo comb that is slightly raised to parallel the bore which aids with proper cheek alignment for scope usage and also has nicely blended flutes in front of the comb to conceal the thumb and prevent thumb to nose contact when the gun recoils. A graceful cheek piece provides additional facial support and is blended beautifully into the stock and grip which discourages the shooter from climbing up onto the scope and keeping the stock aligned with your shoulder for superior recoil absorption. A slender and slightly open oval pistol grip with slight palm swell is well defined with the comb to give you a firm grip which allows quick mounting to the shoulder and aids with proper eye position with the scope. A sleek beveled hand-conforming forend that is oval in shape allowing superior palm to forend weld to help improve off hand shooting, and is proportioned to complement barrels of 22 to 26 inches in length.

Prairie Hunter Features:

Material under barrel channel has been removed to improve balance of the firearm
1/2" rubber recoil pad for quick non-slip mounting
All Finished stocks are 100% machine inlet for a drop in fit
Reinforcing screws installed for added strength at no additional cost
Average weight of 2.8 lbs.
Laboratory acid-based satin finish, proven to resist chemical damage and harsh treatment from the elements
The length of pull on this stock is 13 3/4"
The overall length is approximately 32"

Pro Varmint

The Pro Varmint was designed by Boyds to meet the requests of our customers who were looking for an affordable tactical design for their rimfire rifles. The beavertail forend allows for greater stabilization off bags, but is still trim enough for general purpose shooting. The dual purpose butt hook allows for greater control of the stock and firearm, with your non-trigger hand, and allows for a better grip on the rear bag when shooting from the bench. The Monte Carlo comb brings the shooter's cheek up for use with larger scopes and comes with an ambidextrous grip that allows either hand to assume a more natural position. The slight palm swell on either side provides for a more comfortable grip.

Pro Varmint Features:

Leather-look rubber recoil pad for non-slip shouldering.
Laboratory textured finish in black
13 3/4" Length of pull
Longer forend can be used with 18" to 24" barrels
2 - front and 1- rear swivel stud provided for rapid assembly and disassembly of bipod mount.
Overall length 31"
Approximate weight is 2.85 lbs.

Rimfire Thumbhole

Boyds RT is a synthesis of design elements requested by you, the customer, which have been incorporated by our highly skilled design team, into our hugely popular Thumbhole design, but for Rimfire rifles. The RT sports a sleek, hand conforming thumbhole grip which is well defined to a slight palm swell that puts your hand in its most natural position for comfort and absorbs recoil, further reducing muzzle jump. A beavertail designed forend is oval in shape, allowing superior palm-to-forend weld to improve off-hand shooting, yet wide enough to ride the bags for a session at the range. The forend is proportioned to compliment barrels 18-22 inches in length and can be opened up by the customer to accept customer barrel up to 1 inch in diameter if desired.

Rimfire Thumbhole Features:

Material under barrel channel has been removed to improve the balance of the firearm
1/2" Rubber recoil pad installed for quick non-slip mounting
The length of pull on this item is 13 3/4"
The overall length is approximately 32"
The weight is approximately 2.5 Lbs.

Rimfire Varmint Thumbhole

Boyds RVT stocks sport a straight rollover comb that is parallel to the bore which aids in scope usage and minimizes cheek slap under recoil. A sleek hand conforming thumbhole grip is well defined with slight palm swell that puts your hand in its most natural position for comfort as well as recoil absorption, further reducing muzzle jump. A beavertail designed forend is oval in shape, allowing superior palm-to-forend weld to improve off-hand shooting, yet wide enough to ride the bags for a session at the range. The RVT also has side vents which permit the free floating barrel to cool quickly. The forend is proportioned to compliment barrels 18-22 inches in length and can be opened up by the customer to accept customer barrels up to 1 inch in diameter if desired.

Rimfire Varmint Thumbhole Features:

Material under barrel channel has been removed to improve the balance of the firearm
1/2" Rubber recoil pad installed for quick non-slip mounting
All Boyds' RVT stocks come with 2 front and 1 rear blued swivel studs and are 100% machine inlet to our house action for a drop-in fit
No sharp edges on bottom of stock gives a sleeker design and helps when shifting or turning stock in shooting sticks
Average weight of 2.3 lbs. which allows for great balance of rifle
The overall length is approximately 32"
The length of pull is 13 3/4"
Laboratory acid-based finish-proven to resist chemical damage and harsh treatment from the elements

Rimfire Hunter

The Boyds' RH is a synthesis of design elements requested by you, the customer, which have been incorporated by our highly skilled design team, into this non-thumbhole, ambidextrous, all-purpose design. The RH features a Monte Carlo comb that is slightly raised to parallel the bore. This aids with proper cheek alignment for scope usage and also has nicely blended flutes in front of the comb to conceal the thumb. A slender, slightly closed grip with slight palm swell on both the right and left sides enables any shooter a firm but relaxed grip. A beavertail designed forend is oval in shape, allowing superior palm-to-forend weld to improve off-hand shooting, yet wide enough to ride the bags for a session at the range. The forend is proportioned to compliment barrels 18-22 inches in length and can be opened up by the customer to accept customer barrels up to a diameter of 1 inch if desired.

Rimfire Hunter Features:

Material under barrel channel has been removed to improve the balance of the firearm
1/2" Rubber recoil pad installed for quick non-slip mounting
All Finished and Unfinished stocks come with 2 front and one rear blued swivel stud
No sharp edges on bottom of stock which gives a sleeker design and helps when shifting or turning stock when using shooting sticks
Average weight is 2.3 lbs. which allows for great balance of rifle, while not too light to make it feel off balance or front heavy
Laboratory acid based finished proven to resist chemical damage and harsh treatment from the elements
The length of pull on this item is 13 3/4"
The overall length is approximately 32"

Spike Camp

Spike camps in the backcountry are a strategic necessity to tipping the odds into your favor and allowing you to do more with less. When we started developing this new design, we set out to product a high-quality, extremely comfortable, lightweight, essentials-only stock. Performance of a free-floated barrel, standard sling studs, and thumbhole grip give you everything needed to achieve success while keeping size and weight down.

Spike Camp Features:

Comfortable, ergonomic, ambidextrous thumbhole to accommodate all types of shooters.
Short Mone Carlo comb to allow for proper cheek weld.
1/2" Rubber recoil pad for quick non-slip mounting
All Finished and Unfinished Boyds' Spike Camp stocks come with 1 front and 1 back blued swivel stud.
Average weight of 2.5 lbs. and allows for great balance.
Laboratory acid based satin finish - proven to resist chemical damage and harsh treatment from the elements
The length of pull is 13.5"
The overall length is approximately 29 3/4"

SS Evolution

This new lightweight drop-in from Boyds is the first truly ambidextrous thumbhole stock and one that is sure to turn heads. For all its futuristic looks, however, the SS Evolution® is a purely functional stock. The grip angle allows the hand to assume the most natural position, and the palm swell on either side provides the most comfortable grip possible. Also, there is no forend contact with the barrel, so this stock will accept all barrel contours whether lightweight, sporter, or varmint weight.

SS Evolution® Features:

Lightweight ambidextrous thumbhole stock
1/2" leather-look rubber recoil pad for non-slip shouldering
Laboratory acid based satin finish proven to resist chemical and harsh weather conditions
The length of pull on this stock is 13 3/4"
The overall length is approximately 27"
The weight is approximately 2 Lbs.

Sterling Thumbhole

The recoil-absorbing characteristics of the high comb and straight-grip thumbhole make the Sterling design well suited not only for the serious trap shooter to whom endurance is a factor in competitive shooting, but is equally practical in an upland game or turkey gun.

Sterling Features:

3/4 inch rubber webbed recoil pad for non-slip shouldering and rear swivel stud for mounting sling
Finished parts have a laboratory acid based satin finish proven to resist chemical and harsh weather conditions
Weight is approximately 1.9 Lbs.

Varmint Thumbhole

The VT design is a synthesis of design elements requested by you, the customer, for a thumbhole design. With a large rollover cheek piece for scope usage and straight comb design to minimize cheek slap when shooting, the hand conforming thumbhole allows for increased accuracy while distributing the recoil among the palm and shoulder. This minimizes muzzle jump and felt recoil. The VT has a beaver-tailed designed forend that is flat/oval in shape allowing for superior palm to forend weld to help improve off-hand shooting. It is also wide and flat enough to set up for long range bag work.

Varmint Thumbhole Features:

Cooling Vents - adds to the aesthetics and increases cooling area around barrel for those longer sessions at the range.
Customers will have the ability to open the forend to accept barrels up to 1 1/4" wide
1/2" Rubber recoil pad for quick non-slip mounting
All Finished and Unfinished Boyds' VT stocks come with 2 front and 1 rear blued swivel stud. No sharp edges on bottom of stock - gives a sleeker design and helps when shifting stock in shooting sticks
Average weight of 2.8 lbs. - allows for great balance of the rifle, and only adds about 9 oz. to firearm's overall weight compared to standard plastic stocks offered by manufacturers
Laboratory acid based satin finish - proven to resist chemical damage and harsh treatment from the elements
The length of pull is 13 3/4"
The overall length is approximately 32"